Home » Our Products » 3D Alignment

3D Alignment


3D Wheel Alignment China Model
Item Code :- 29


Technical Specification Accuracy Range
Display Accuracy 1'/0.01 /0.1mm  
Camber ±2'

±10°

Caster

±6'

±20°

King-pin

±6'

±20°

Wheel Toe

±2'

±20°

Set Back

±2'

±5°

Thrust angle

±2'

±5°

Track Width

±2mm

1800mm

Wheelbase

Wheelbase

3500mm

Function Introduction
  • Reference 3D virtual plane for measuring the vehicle, faster and more accurate.
  • Accuracy calculates the entire vehicle angle by two high precision cameras.
  • Machine in the factory with valid calibration and it is not necessary to perform calibration in the customer.
  • Four standard targets, no electronic spare part and the cable, easy maintaining.
  • The targets no need to charge, no need level and no Influenced by the temperature.
  • One key restore or backup the system, no influenced by the virus and false operation.
  • Upgrade the Autodata per year.
  • Comprehensive measurement for the Track Width & Wheelbase of the automotive chassis, make the technician learn more about the automotive chassis, better than the normal measurement.
  • Automatic Compensation: NO need to roll or raise the vehicle.
  • Advanced software enables the imaging cameras to automatically adjust their height when the vehicle is raised or lowered and allowing the technician to perform adjustments at a comfortable working height.
  • Tire Diameter and Revolution Measurement, Steering System Measurement

3D Wheel Alignment
Item Code: 029


Production Description :
  1. 3D wheel alignment machine with CE;
  2. Without electronic components;
  3. Without periodic calibration;
    "UNIMECK 3D wheel alignment machine 3D-AVATA-I
Technical Parameter
  1. Camber: +10°~-10°(±0.02°)
  2. Caster: +20°~-20°(±0.06°)
  3. K.P.I :" +20°~-20°(±0.06°)
  4. Toe-in: +20°~-20°(±0.06°)
  5. Set Back: +5°~-5°(±0.02°)
  6. Thrust Angle: +5°~-5°(±0.02°)
Specification
  • Four wheel alignment data could be calculated by computer through 3D digital signals, which is obtained from target boards fixed on the four wheels by two speedy and high-accuracy digital dynamic cameras.
  • Without electronic parts and connection, the four target boards have detector image only, which reduce fault greatly.
  • Electric compensation could be achieved by only once lift or before and after push, which improves measuring speed greatly.
  • Machines are calibrated in factory before shipment, so it could be used directly after installation without regular calibration.
  • Steering wheel reset function ensure the steering wheel keep straight without adjusting set back or thrust angle.
  • Four wheel alignment data quick searches, and update data by free permanently.

Wheel Alignment CCD Bluetooth 4 Head
Item Code: 027


Description Of CCD Bluetooth Wheel Alignment Machine
  • Adopts the charge coupled device (CCD) with high resolution, infrared 8-beam and full loop measurement, accurate and stable, wireless communication mode
  • Complete databank : Wheel alignment data of over 20,000 vehicle models is stored in the system. User can also add new data to the databank Based on the thrust line to realize the real alignment measurement
  • Front alignment test function : User can select the alignment mode flexibly. Only two probe rods are mounted can the emergency alignment measurement for the front wheels be performed.
  • The sensor heads are individually interchangeable. After changing one of the sensor heads, the other three needs not to recalibrate, which makes the after-sales service more convenient.
  • Fully intelligentized. The system can automatically recognize the vehicle with super-low chassis to perform the alignment test for this kind of vehicle and the vehicle with enclosed housing. Aiming to the vehicle model, the system can automatically turn on the corresponding functions of height measurement and counterweight, etc.
  • The demonstration version can run all test flow, which makes user's training more convenient and quick.
Technical Specifications
Meas Precision Meas.Field Meas. Range
Toe ±4' ±10 o ±10 o
Individual Toe ±2' ±0.01 o ±5 o
Camber ±2' ±0.01 o ±15 o
Caster ±6' ±0.10 o ±6 o
SAI/KPI ±6' ±0.10 o ±20 o
Set-back ±2' ±0.03 o -


Wheel Alignment RF Technology
Item Code: 033


The Wheel Alignment Systems offered by us are fitted with 4 measuring heads, 3 rotary plates and 2 rear wheel sliders. Our systems are easy to use, run on simple operator instructions and requires almost zero maintenance. Presented with 15" LCD monitor, these systems can operate on the temperature ranging from 1 degree Celsius to 60 degree Celsius.

Salient Features:
  • With four measuring heads with Front. & Rear Wheel Alignment
  • Unlimited memory date specifications
  • Run out compensation in four phases
  • 20" LCD Monitor
  • Wheel rim si2e=10" to 24"
  • Communication through RF Technology
  • Power failure date protection
  • Camber, caster, toe, front set back and thrust angle's measurement
  • With 2 rotary plates & 2 rear wheel sliders
  • Power coated cabinet
  • Machine's operating temperature is maximum 60 degree Celsius and minimum 1 degree Celsius
  • Window XP (Software up gradation through CD drive with every new changes which will takes place in upcoming time). Self tracking of left & right turns
  • 3-D, pictorial & three color printout
  • A4-Color ink-jet printers

3D Wheel Alignment


Outstanding Functions
  • Intelligent auto lifting pole.
  • During operating, the cameras track the position of the vehicle and adjust to the corresponding height automatically.
  • 3D Measurement: The 3D measuring technics which is based on real running surface of wheels is more specific and precision.
  • Shooting System: Composed of high-performance cameras and four target disks, the camera system can measure the vehicle's running posture vividly.
  • Target Disk: The solid-state target disks made of special materials are sturdy and durable without electronic components.
  • Pushing Measurement: None of any wheel compensation is needed. Only one pushing can complete the measurement.
  • 3D Max System: The unique visual 3D max dynamic measurement system is real and vivid.
  • Calibration System: Only one simple calibration is needed after the initial installation without any repetitive calibration following.

Advantage of 3D Wheel Aligners
  • The target disks are not composed of the electronic components used in traditional wheel alignment. The problems caused by the influence of the electronic components are eliminated.
  • There is no need to do complex wheel compensation for the wheel theoretic plane. Only one pushing measurement is needed t complete the precision measuring in order to shorten testing time.3D Wheel Alignment

    Outstanding Functions
    • Intelligent auto lifting pole.
    • During operating, the cameras track the position of the vehicle and adjust to the corresponding height automatically.
    • 3D Measurement: The 3D measuring technics which is based on real running surface of wheels is more specific and precision.
    • Shooting System: Composed of high-performance cameras and four target disks, the camera system can measure the vehicle's running posture vividly.
    • Target Disk: The solid-state target disks made of special materials are sturdy and durable without electronic components.
    • Pushing Measurement: None of any wheel compensation is needed. Only one pushing can complete the measurement.
    • 3D Max System: The unique visual 3D max dynamic measurement system is real and vivid.
    • Calibration System: Only one simple calibration is needed after the initial installation without any repetitive calibration following.
    Advantage of 3D Wheel Aligners
    • The target disks are not composed of the electronic components used in traditional wheel alignment. The problems caused by the influence of the electronic components are eliminated.
    • There is no need to do complex wheel compensation for the wheel theoretic plane. Only one pushing measurement is needed t complete the precision measuring in order to shorten testing time.

wheel alignment 2 head display


Description Of CCD Bluetooth Wheel Alignment Machine
  • Adopts the charge coupled device (CCD) with high resolution, infrared 8-beam and full loop measurement, accurate and stable, wireless communication mode
  • Complete databank : Wheel alignment data of over 20,000 vehicle models is stored in the system. User can also add new data to the databank
  • Based on the thrust line to realize the real alignment measurement
  • Front alignment test function : User can select the alignment mode flexibly. Only two probe rods are mounted can the emergency alignment measurement for the front wheels be performed
  • The sensor heads are individually interchangeable. After changing one of the sensor heads, the other three needs not to recalibrate, which makes the after-sales service more convenient
  • Fully intelligentized. The system can automatically recognize the vehicle with super-low chassis to perform the alignment test for this kind of vehicle and the vehicle with enclosed housing. Aiming to the vehicle model, the system can automatically turn on the corresponding functions of height measurement and counterweight, etc
  • The demonstration version can run all test flow, which makes user's training more convenient and quick.

Technical Specifications
Meas Precision Meas.Field Meas. Range
Toe ±4' ±10 o ±10 o
Individual Toe ±2' ±0.01 o ±5 o
Camber ±2' ±0.01 o ±15 o
Caster ±6' ±0.10 o ±6 o
SAI/KPI ±6' ±0.10 o ±20 o
Set-back ±2' ±0.03 o -

3D Wheel Alignment UK Model No. 20


3D cameras alignment-Based on the car and not influenced by the platform Measurement system-equipped with double digital cameras and four target disk, supplying revolutionary measurement mode Target disk-There is no electronic components and connection lines on the target disk, so the wheel alignment will not has a component failure problem. Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration Measurement progress-no need to compensate for steel ring , the precise eccentric compensation will be just once pulling or pushing the car back and forth Software system--Easy to operate, complete conventional basic parameters including two minutes ,significantly faster than conventional aligners Daily Maintenance-Easily maintenance and download freely upgrade for the model data

Standard Configuration
deluxe cabinets, Dell branded computers (Liquid Crystal Display), Canon printers, target disk, Pylon, brake holder, steering wheel holder, wedge-shaped pads, corner plate, corner plate blocks of the transition, specific target disk, wheel rim adapter

Products Advantages:
Unimeck company research the software by itself. Electric moveable post, it can measure and adjust the car in different platform height. Special target, special software, accuracy measurement in Auto Body Ride Lock Height. The data can be input the computer by automatically, it is also can be input by hand.Software Features
Basic Functions:
  • parameters measurement such as camber, Caster, Kingpin inclination, Toe-in & Toe-out, Set back, Thrust angle
Extension Functions:
  1. Single-wheel measurement.
  2. The vehicle lift measurement.
  3. Axis deviation measurement
  4. Wheel deviation measurement,
  5. Animation,
  6. Steering wheel align function,
  7. Alignment platform levelness testing function,
  8. Engine bracket adjustment.,
  9. Toe-in curvature measurement function
  10. Toe-in lockup curvature measurement function,
  11. Zero toe-in camber measurement function,
  12. .Air suspension vehicle alignment software(proprietary software),
  13. Rolling Radius Measurement
  14. Scrub Radius Measurement
  15. Wheel distance measurement
  16. Axis distance measurement
Measurement project Accuracy Measurement range
Show Precision ±2´ ±10°
Camber ±6´ ±20°
Caster ±6´ ±20°
Kingpin Inclination ±2´ ±20°
Toe-in & Toe-out ±2´ ±5°
Set back ±2´ ±5°
Thrust angle ±2mm
Wheel Deviation ±2mm
Axis Deviation 1´/1mm


3D Wheel Alignment UK Model No. 10


Production Description :
  • High speed of calculation
  • Sturdy and durable target disks
  • User-friendly operation
  • Unique 3D animation program
  • Height-fixed Pole
  • HP Computer
  • 19' LCD Monitor
  • Unique Target Disks
  • Standard Clamps
  • Steering Wheel Lock
  • Brake Lock
  • Wedge-shaped Pads
  • Turntables
  • Transition Blocks of Turntables
  • Laser Printer

Principles
The corresponding datum plane and driving central line for calculating are constructed by the centre of four wheels got by the four target disks. Then according to the position of each disk in the plane and central line, the parameters of wheel alignment can be figured out. Therefore, measurement deviation due to the non-horizontal vehicle plane and lifting platform during the measurement can be avoided.

Principles of V3D System
During operating, users can adjust the height of vehicles according to their requirements. And the IAA1 system can automatically calculate and adjust the cameras to the corresponding height. No manual work will intervene in this process. There is no influence on measurement results.

Schematic Illustration of BCC
BCC: After initial installation, only one simple calibration is needed, the best measuring results can be achieved. And there is no need for repetitive calibration.

3Dmax Dynamic Display System
It can make the observation of the real 3D profile of each wheel at any time vividly and conveniently.

No Electronic Components
There is no electronic components, thus none of electronic circuits trouble will occur. And the solid-state target disks made of special materials are sturdy and durable.

Four-point Wheel Clamps
It is suitable for various wheels with diameters ranging 11" to 22". The holding tire clamps and the wheel clamps with maximum 27 " are optional.

3D Animation Technics
With the specific high-speed camera and the high-performance computers, it takes only one minute to complete the basic position measurement.

Reminding Window
Helping users complete the measurement, it offers feedback and monitor the measurement process effectively.

Pre-tightening Rotatable Jaw
Fitting for most of the external steel rim and coordinating with the anti-loose retractor, it effectively prevents clamps from falling.

Pushing the Vehicle Once
The deviation caused by steel rim and mechanical components deformation, installation errors and other factors can be compensated comprehensively.

Body Height Measurement
Utilizing the target disks for height measrsuring (optional), the height of the vehicle bodys relative plane can be quickly measured

3D Animation Adjustment Guidance
Various adjustment methods of chassis position parameter are available.

Animation Operation Reminding
All the operation systems are instructed by 3D animation which prompts the users to prepare for the next step.

Outstanding Functions
  • 3D Measurement: The 3D measuring technics which is based on real running surface of wheels is more specific and precision.
  • Shooting System: Composed of high-performance cameras and four target disks, the camera system can measure the vehicles running posture vividly.
  • Target Disk: The solid-state target disks made of special materials are sturdy and durable without any electronic components.
  • Pushing Measurement: None of any wheel compensation is needed. Only one pushing can complete the measurement.
  • Calibration System: Only one simple calibration is needed after the initial installation without any repetitive calibration following